Nickel 200 Bolts
Nickel 200 Stud Bolt, ASTM B164 Ni-200 Bolts, Nickel Aloy 200 NA 11 High Tensile Bolts, Nickel UNS N02200 Heavy Hex Bolt Suppliers in India.
Ranfit Metal & Alloys is a known trader and exporter of Nickel Alloy 200 Bolts, which exhibits resistance to corrosion by many reducing media. In no event, Nickel 200 Bolts should the material be heated above 2150 Degree F (1175 Degree C). In moderately reducing acids, alkaline or neutral solutions, Nickel 200 Bolts may be considered for use. Its resistance to seawater also makes Nickel 200 Hex Head Bolts excellent for trolling wire. Nickel 200 Square Bolts can be used in a variety of applications such as packed columns, pressure vessels and reactors. Nickel 200 U-Bolts is used in ethyl chloride purification and numerous other areas of process plant. Nickel 200 Eye Bolts is also used in Chemical plant equipment, Aerospace applications, and Musical instruments.
Small additions of aluminum and titanium form Nickel 200 T-Bolts with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Nickel 200 Hex Bolts is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions. Nickel 200 Lag Bolts does not undergo a ductile-to-brittle transition even when cooled to the temperature of liquid hydrogen. However, Nickel 200 Counter Sunk Bolts is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength. Nickel UNS N02200 Bolts is therefore widely used in chemical, marine engineering, and hydrocarbon processing equipment.
Nickel DIN 2.4066 Bolts Supplier, Nickel 200 Full Threaded Bolts, Nickel Alloy 200 Half Threaded Bolts, ASME SB164 200 Nickel Alloy Hex Head Bolts Supplier & Exporter in India.
Nickel 200 Bolts Specification
| Grade | Nickel 200 (N02200) |
|---|---|
| ASTM/ASME Specifications | ASTM B 160/164, ASME SB 160/164 |
| Nickel 200 Bolt size | M 02 to M 160, Custom Sizes |
| Nickel 200 Bolts Length | 3 mm to 200 mm |
| Nickel 200 Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Nickel 200 Bolts | IS1364, ISO 4014, ISO 4017, DIN 933, DIN 931, BS 1083, BS 1768, ASME B18.2.1, JIS B1180, DIN 558, ISO 4018, DIN-EN14399-4, DIN 200, ISO 4016, CSN 21301, EU 24016, DIN 7968, DIN7990, ASME B18.2.1, B18.5 |
| Form of Nickel 200 Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Bolts | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
| Nickel 200 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Nickel 200 Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Nickel 200 Bolts Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Chemical Composition of Nickel 200 Bolts
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties of Nickel 200 Bolts
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Types of Nickel 200 Bolts
Nickel 200 Hex Bolts
Nickel 200 Square Bolts
Nickel 200 Hollow Allen Bolts
Nickel 200 Anchor Bolts
Nickel 200 Carriage Bolts
Nickel 200 Long Eye Bolts
Nickel 200 Allen Cap Bolts
Nickel 200 Flanged Bolts
Nickel 200 Lag Bolts
Nickel 200 Counter Sunk Bolts
Nickel 200 J Bolts
Nickel 200 U Bolts
Nickel 200 Bolts Forms & Availability
| Products | Size | |
|---|---|---|
| Nickel 200 Heavy Hex Bolts | Nickel 200 Hollow Hex Bolts | M 02 to M 160, Custom Sizes |
| Nickel 200 Hollow Allen Bolts | Nickel 200 Machine Bolts | |
| Nickel 200 Socket Head Bolts | Nickel 200 Hex Flange Bolts | |
| Nickel 200 Eye Bolts | Nickel 200 Lag Bolts | |
| Nickel 200 J Bolts | Nickel 200 U Bolts | |
| Nickel 200 Shoulder Bolts | Nickel 200 Elevator Bolts | |
| Nickel 200 Hanger Bolts | Nickel 200 Allen Bolts | |
Nickel 200 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards Bolts (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Square & Hex Head Bolts | ANSI/ASME B18.2.1 | Inch Series |
| Hex Head Bolts | ANSI/ASME B18.2.3.5M | Metric |
| Heavy Hex Bolts | ANSI/ASME B18.2.3.6M | Metric |
| Heavy Hex Structural Bolts | ANSI/ASME B18.2.3.7M | Metric |
| Square Head Bolts | ANSI/ASME B18.2.3.10M | Metric |
| Round Head Bolts | ANSI/ASME B18.5 | Inch Series |
| Round Head Short Square Neck Bolts | ANSI/ASME B18.5.2.1M | Metric |
| Round Head Square Neck Bolts | ANSI/ASME B18.5.2.2M | Metric |
| Round Head Square Neck Bolts With Large Head | ANSI/ASME B18.5.2.3M | Metric |
| Track Bolts | ANSI/ASME B18.10 | Inch Series |
| Forged Eye Bolts | ANSI/ASME B18.15 | Inch Series |
| Lifting Eye Bolts | ANSI/ASME B18.15M | Metric |
| Hex Head Bolts | DIN 931 | Metric |
| Heavy Hex Bolts | DIN 6914 | Metric |
| Countersunk Square Head Bolts With Short Neck | DIN 608 | Metric |
| Lifting Eye Bolts (Type A) | DIN 444A | Metric |
| Lifting Eye Bolts (Type B) | DIN 444B | Metric |
| Square Head Bolts With Collar | DIN 478 | Metric |
| Forged Lifting Eyes/Eye Bolts | DIN 580 | Metric |
| Carriage Bolts | DIN 603 | Metric |
| Flat Countersunk Nib Bolts | DIN 604 | Metric |
| Carriage Bolts | DIN 607 | Metric |
| U Bolts | DIN 3570 | Metric |
| Hex Flange Bolts | DIN 6921 | Metric |
| Plough Bolts with 2 Nibs | DIN 11014 | Metric |
| Hex Head Bolts with Shank | ISO 4014 | Metric |
| Hex Head Bolts with Nuts | ISO 4016 | Metric |
| Full Thread Hex Head Bolts | ISO 4017 | Metric |
| Hex Flange Bolts | ISO 4162 | Metric |
| Hex Flange Bolts | ISO 8100 | Metric |
| Hex Bolt With Flange | ISO 8102 | Metric |
| Hex Flange Bolts | ISO 15071 | Metric |
| Mushroom Head Square Neck Bolts | ISO 8677 | Metric |
| Fine Threaded Hex Head Bolts | ISO 8765 | Metric |
| Hex Head Bolts | IS 1363 Part 1 | Metric |
| Hex Head Bolts | IS 1363 Part 2 | Metric |
| Hex Head Bolts | IS 1364 Part 1 | Metric |
| Hex Head Bolts For Structural Joints | IS 6639 | Metric |
| Hex Head Transmission Tower Bolts | IS 12427 | Metric |
| Hexagon Flange Bolts | IS 15582 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Nickel 200 Bolts Dimensions
| **All measurements in millimeters** | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM B164 | ACROASTM B164 THE FLATS | ACROASTM B164 CORNERS | ||||
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Nickel 200 Heavy Hex Bolts Dimensions
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
Nickel 200 Bolts Torque Chart
| Torque Specifications | ||||||
|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | ||||
| Nickel 200 | ||||||
| #2 | 56 | 2.5 | ||||
| 64 | 3.0 | |||||
| #3 | 48 | 3.9 | ||||
| 56 | 4.4 | |||||
| #4 | 40 | 5.2 | ||||
| 48 | 6.6 | |||||
| #5 | 40 | 7.7 | ||||
| 44 | 9.4 | |||||
| #6 | 32 | 9.6 | ||||
| 40 | 12.1 | |||||
| #8 | 32 | 19.8 | ||||
| 36 | 22.0 | |||||
| #10 | 24 | 22.8 | ||||
| 32 | 31.7 | |||||
| 1/4 | 20 | 75.2 | ||||
| 28 | 94.0 | |||||
| 5/16 | 18 | 132 | ||||
| 24 | 142 | |||||
| 3/8 | 16 | 236 | ||||
| 24 | 259 | |||||
| 7/16 | 14 | 376 | ||||
| 20 | 400 | |||||
| 1/2 | 13 | 517 | ||||
| 20 | 541 | |||||
| 9/16 | 12 | 682 | ||||
| 18 | 752 | |||||
| 5/8 | 11 | 1110 | ||||
| 18 | 1244 | |||||
| 3/4 | 10 | 1530 | ||||
| 16 | 1490 | |||||
| 7/8 | 9 | 2328 | ||||
| 14 | 2318 | |||||
| 1 | 8 | 3440 | ||||
| 14 | 3110 | |||||
| 1 1/8 | 7 | 413 | ||||
| 12 | 390 | |||||
| 1 1/4 | 7 | 523 | ||||
| 12 | 480 | |||||
| 1 1/2 | 6 | 888 | ||||
| 12 | 703 | |||||
Nickel 200 Bolts Sizes
| Nickel 200 Bolts size chart | Nickel 200 Bolts size guide | Nickel 200 Bolts dimensions |
|---|---|---|
| 3/8″-16 x 1″ Grade 5 Finish Nickel 200 Bolts | 1/2″-13 x 1-1/2″ Grade 5 Finish Nickel 200 Bolts | 1/4″-20 x 1″ Grade 5 Finish Nickel 200 Bolts |
| 3/8″-16 x 1-1/4″ Grade 5 Finish Nickel 200 Bolts | 3/8″-16 x 1-1/2″ Grade 5 Finish Nickel 200 Bolts | 1/4″-20 x 3/4″ Grade 5 Finish Nickel 200 Bolts |
| 1/2″-13 x 2″ Grade 8 Yellow Finish Nickel 200 Bolts | 1/2″-13 x 2″ Grade 5 Finish Nickel 200 Bolts | 1/2″-13 x 1-1/2″ Grade 8 Yellow Finish Nickel 200 Bolts |
| 5/8″-11 x 2″ Grade 8 Yellow Finish Nickel 200 Bolts | 1/4″-20 x 3/4″ Grade 18-8 Nickel 200 Bolts | 5/16″-18 x 1″ Grade 5 Finish Nickel 200 Bolts |
| 3/8″-16 x 1″ Grade 8 Yellow Finish Nickel 200 Bolts | 3/8″-16 x 1″ Grade 18-8 Nickel 200 Bolts | 3/8″-16 x 1-1/2″ Grade 8 Yellow Finish Nickel 200 Bolts |
| 1/4″-20 x 1″ Grade 18-8 Nickel 200 Bolts | 5/8″-11 x 2″ Grade 5 Finish Nickel 200 Bolts | 5/8″-11 x 2-1/2″ Grade 8 Yellow Finish Nickel 200 Bolts |
| 3/8″-16 x 2″ Grade 5 Finish Nickel 200 Bolts | 3/8″-16 x 1-1/4″ Grade 8 Yellow Finish Nickel 200 Bolts |
Nickel 200 Bolts Weight Chart
| MM THREADS AS PER IS 1363/67 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Other Types of Nickel 200 Bolts
| Nickel AFNOR N-100M Hex Cap Screw | Nickel BS NA 11 Shoulder Bolt |
| Nickel BS NA 11 Hanger Bolt | Nickel AFNOR N-100M Socket Cap Screw |
| Nickel GOST НП-2 Anchor Bolt | Nickel DIN 2.4066 Machine Bolt |
| Nickel DIN 2.4066 Draw Bolt | Nickel GOST НП-2 J Bolt |
| ASME SB164 Alloy 200 Countersunk Slotted Screw | Alloy 200 Bolts |
| Alloy 200 Hanger Bolt | ASME SB164 Alloy 200 Flange Bolts |
| Nickel JIS NW 2200 Steel Counter sunk Bolt | Nickel UNS N02200 Hex Bolt |
| Nickel UNS N02200 Eye Bolt | Nickel JIS NW 2200 T Bolt |
| Nickel EN Ni 99.2 Lag Bolt | ASTM B164 Nickel 200 Step Bolt |
| ASTM B164 Nickel 200 Allen Bolts | Nickel EN Ni 99.2 Anchor Bolts |