Monel 400 Bolts
Monel 400 Stud Bolt, Monel Alloy 400 Heavy Hex Bolt, Monel UNS N04400 High Tensile Bolts, Alloy 400 Plow Bolt Suppliers in India.
Ranfit Metal & Alloys is a distinguished exporter and supplier of Monel Alloy 400 Bolts, which is stronger than pure nickel. Monel 400 Hex Head Bolts is a single phase and solid-solution nickel-copper alloy. Monel 400 Square Bolts is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 U-Bolts is a solid-solution alloy that can be hardened only by cold working. The solid solution alloy like Monel 400 Eye Bolts can be hardened by cold working. Monel 400 T-Bolts can be tempered or cold worked to increase its properties, in its standard annealed condition. Monel 400 Hex Bolts is used for chemical, marine engineering, hydrocarbon processing equipment, and more. Monel 400 Lag Bolts is also used in valves, fittings, pumps, shafts, and heat exchangers.
Monel 400 Counter Sunk Bolts has high strength and toughness over a wide temperature range. Monel UNS N04400 Bolts has good ductility and thermal conductivity, along with exhibiting good corrosion resistance. Monel WNR 2.4360 Bolts has excellent resistance to a variety of corrosive environments from mildly oxidizing through neutral and in moderately reducing conditions. Monel WNR 2.4360 Bolts exhibits characteristics like good corrosion resistance, high strength and good weldability. Nickel-Alloy 400 Bolts works in a wide range of temperatures, and is available in multiple forms for a variety of products.
Monel 400 Full Threaded Bolts, Monel® Alloy 400 Half Threaded Bolts, ASTM B164 Monel Alloy 400 J Bolts, Monel DIN 2.4360 Hex Head Bolt Supplier & Exporter in India.
Monel 400 Bolts Specification
| Grade | Monel 400 (N04400) |
|---|---|
| ASTM/ASME Specifications | ASTM B 160/164, ASME SB 160/164 |
| Monel 400 Bolt size | M 02 to M 160, Custom Sizes |
| Monel 400 Bolts Length | 3 mm to 400 mm |
| Monel 400 Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Monel 400 Bolts | IS1364, ISO 4014, ISO 4017, DIN 933, DIN 931, BS 1083, BS 1768, ASME B18.2.1, JIS B1180, DIN 558, ISO 4018, DIN-EN14399-4, DIN 400, ISO 4016, CSN 21301, EU 24016, DIN 7968, DIN7990, ASME B18.2.1, B18.5 |
| Form of Monel 400 Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Bolts | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
| Monel 400 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 4000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Monel 400 Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, Monel plated, anodizing, plated zinc-Monel Zinc (blue, black, yellow, white), black oxide, |
Monel 400 Bolts Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Chemical Composition of Monel 400 Bolts
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties of Monel 400 Bolts
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Types of Monel 400 Bolts
Monel 400 Hex Bolts
Monel 400 Square Bolts
Monel 400 Hollow Allen Bolts
Monel 400 Anchor Bolts
Monel 400 Carriage Bolts
Monel 400 Long Eye Bolts
Monel 400 Allen Cap Bolts
Monel 400 Flanged Bolts
Monel 400 Lag Bolts
Monel 400 Counter Sunk Bolts
Monel 400 J Bolts
Monel 400 U Bolts
Monel 400 Bolts Forms & Availability
| Products | Size | |
|---|---|---|
| Monel 400 Heavy Hex Bolts | Monel 400 Hollow Hex Bolts | M 02 to M 160, Custom Sizes |
| Monel 400 Hollow Allen Bolts | Monel 400 Machine Bolts | |
| Monel 400 Socket Head Bolts | Monel 400 Hex Flange Bolts | |
| Monel 400 Eye Bolts | Monel 400 Lag Bolts | |
| Monel 400 J Bolts | Monel 400 U Bolts | |
| Monel 400 Shoulder Bolts | Monel 400 Elevator Bolts | |
| Monel 400 Hanger Bolts | Monel 400 Allen Bolts | |
Monel 400 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards Bolts (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Square & Hex Head Bolts | ANSI/ASME B18.2.1 | Inch Series |
| Hex Head Bolts | ANSI/ASME B18.2.3.5M | Metric |
| Heavy Hex Bolts | ANSI/ASME B18.2.3.6M | Metric |
| Heavy Hex Structural Bolts | ANSI/ASME B18.2.3.7M | Metric |
| Square Head Bolts | ANSI/ASME B18.2.3.10M | Metric |
| Round Head Bolts | ANSI/ASME B18.5 | Inch Series |
| Round Head Short Square Neck Bolts | ANSI/ASME B18.5.2.1M | Metric |
| Round Head Square Neck Bolts | ANSI/ASME B18.5.2.2M | Metric |
| Round Head Square Neck Bolts With Large Head | ANSI/ASME B18.5.2.3M | Metric |
| Track Bolts | ANSI/ASME B18.10 | Inch Series |
| Forged Eye Bolts | ANSI/ASME B18.15 | Inch Series |
| Lifting Eye Bolts | ANSI/ASME B18.15M | Metric |
| Hex Head Bolts | DIN 931 | Metric |
| Heavy Hex Bolts | DIN 6914 | Metric |
| Countersunk Square Head Bolts With Short Neck | DIN 608 | Metric |
| Lifting Eye Bolts (Type A) | DIN 444A | Metric |
| Lifting Eye Bolts (Type B) | DIN 444B | Metric |
| Square Head Bolts With Collar | DIN 478 | Metric |
| Forged Lifting Eyes/Eye Bolts | DIN 580 | Metric |
| Carriage Bolts | DIN 603 | Metric |
| Flat Countersunk Nib Bolts | DIN 604 | Metric |
| Carriage Bolts | DIN 607 | Metric |
| U Bolts | DIN 3570 | Metric |
| Hex Flange Bolts | DIN 6921 | Metric |
| Plough Bolts with 2 Nibs | DIN 11014 | Metric |
| Hex Head Bolts with Shank | ISO 4014 | Metric |
| Hex Head Bolts with Nuts | ISO 4016 | Metric |
| Full Thread Hex Head Bolts | ISO 4017 | Metric |
| Hex Flange Bolts | ISO 4162 | Metric |
| Hex Flange Bolts | ISO 8100 | Metric |
| Hex Bolt With Flange | ISO 8102 | Metric |
| Hex Flange Bolts | ISO 15071 | Metric |
| Mushroom Head Square Neck Bolts | ISO 8677 | Metric |
| Fine Threaded Hex Head Bolts | ISO 8765 | Metric |
| Hex Head Bolts | IS 1363 Part 1 | Metric |
| Hex Head Bolts | IS 1363 Part 2 | Metric |
| Hex Head Bolts | IS 1364 Part 1 | Metric |
| Hex Head Bolts For Structural Joints | IS 6639 | Metric |
| Hex Head Transmission Tower Bolts | IS 12427 | Metric |
| Hexagon Flange Bolts | IS 15582 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Monel 400 Bolts Dimensions
| **All measurements in millimeters** | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM B164 | ACROASTM B164 THE FLATS | ACROASTM B164 CORNERS | ||||
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Monel 400 Heavy Hex Bolts Dimensions
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
Monel 400 Bolts Torque Chart
| Torque Specifications | ||||||
|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | ||||
| Monel 400 | ||||||
| #2 | 56 | 2.5 | ||||
| 64 | 3.0 | |||||
| #3 | 48 | 3.9 | ||||
| 56 | 4.4 | |||||
| #4 | 40 | 5.2 | ||||
| 48 | 6.6 | |||||
| #5 | 40 | 7.7 | ||||
| 44 | 9.4 | |||||
| #6 | 32 | 9.6 | ||||
| 40 | 12.1 | |||||
| #8 | 32 | 19.8 | ||||
| 36 | 22.0 | |||||
| #10 | 24 | 22.8 | ||||
| 32 | 31.7 | |||||
| 1/4 | 20 | 75.2 | ||||
| 28 | 94.0 | |||||
| 5/16 | 18 | 132 | ||||
| 24 | 142 | |||||
| 3/8 | 16 | 236 | ||||
| 24 | 259 | |||||
| 7/16 | 14 | 376 | ||||
| 20 | 400 | |||||
| 1/2 | 13 | 517 | ||||
| 20 | 541 | |||||
| 9/16 | 12 | 682 | ||||
| 18 | 752 | |||||
| 5/8 | 11 | 1110 | ||||
| 18 | 1244 | |||||
| 3/4 | 10 | 1530 | ||||
| 16 | 1490 | |||||
| 7/8 | 9 | 2328 | ||||
| 14 | 2318 | |||||
| 1 | 8 | 3440 | ||||
| 14 | 3110 | |||||
| 1 1/8 | 7 | 413 | ||||
| 12 | 390 | |||||
| 1 1/4 | 7 | 523 | ||||
| 12 | 480 | |||||
| 1 1/2 | 6 | 888 | ||||
| 12 | 703 | |||||
Monel 400 Bolts Sizes
| Monel 400 Bolts size chart | Monel 400 Bolts size guide | Monel 400 Bolts dimensions |
|---|---|---|
| 3/8″-16 x 1″ Grade 5 Finish Monel 400 Bolts | 1/2″-13 x 1-1/2″ Grade 5 Finish Monel 400 Bolts | 1/4″-20 x 1″ Grade 5 Finish Monel 400 Bolts |
| 3/8″-16 x 1-1/4″ Grade 5 Finish Monel 400 Bolts | 3/8″-16 x 1-1/2″ Grade 5 Finish Monel 400 Bolts | 1/4″-20 x 3/4″ Grade 5 Finish Monel 400 Bolts |
| 1/2″-13 x 2″ Grade 8 Yellow Finish Monel 400 Bolts | 1/2″-13 x 2″ Grade 5 Finish Monel 400 Bolts | 1/2″-13 x 1-1/2″ Grade 8 Yellow Finish Monel 400 Bolts |
| 5/8″-11 x 2″ Grade 8 Yellow Finish Monel 400 Bolts | 1/4″-20 x 3/4″ Grade 18-8 Monel 400 Bolts | 5/16″-18 x 1″ Grade 5 Finish Monel 400 Bolts |
| 3/8″-16 x 1″ Grade 8 Yellow Finish Monel 400 Bolts | 3/8″-16 x 1″ Grade 18-8 Monel 400 Bolts | 3/8″-16 x 1-1/2″ Grade 8 Yellow Finish Monel 400 Bolts |
| 1/4″-20 x 1″ Grade 18-8 Monel 400 Bolts | 5/8″-11 x 2″ Grade 5 Finish Monel 400 Bolts | 5/8″-11 x 2-1/2″ Grade 8 Yellow Finish Monel 400 Bolts |
| 3/8″-16 x 2″ Grade 5 Finish Monel 400 Bolts | 3/8″-16 x 1-1/4″ Grade 8 Yellow Finish Monel 400 Bolts |
Monel 400 Bolts Weight Chart
| MM THREADS AS PER IS 1363/67 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 400 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Other Types of Monel 400 Bolts
| Monel UNS N04400 Eye Bolt | Monel 400 BS NA 13 T Bolt |
| Monel 400 BS NA 13 Lag Bolt | Monel UNS N04400 Step Bolt |
| Monel JIS NW 4400 Allen Bolts | Monel Alloy 400 Anchor Bolts |
| Monel Alloy 400 Steel Counter sunk Bolt | Monel JIS NW 4400 Track Bolts |
| Monel 400 EN NiCu30Fe Mushroom Head Square Neck Bolts | Monel DIN 2.4360 T-Head Bolts |
| Monel DIN 2.4360 Hexagon Domed Cap Nuts | Monel 400 EN NiCu30Fe Foundation Bolts |
| Monel GOST МНЖМц 28-2,5-1,5Strut Bolts | Nickel Alloy 400 6mm Nyloc Bolts |
| Nickel Alloy 400 U Bolt | Monel GOST МНЖМц 28-2,5-1,5 Elevator Bolts |
| Monel AFNOR NU-30M 12 Point Flange Bolts | Monel® Alloy 400 Stove Bolts |
| Monel® Alloy 400 Hanger Bolts | Monel AFNOR NU-30M Hexagon Bolts with Thread |