Monel K500 Stud Bolts
Monel K500 Tap End Stud Bolts, Monel® Alloy K500 Stud Half Thread Bolts, Monel UNS N05500 Double Ended Stud, ASTM F468 Alloy K500 Double Ended Stud Suppliers in India.
Ranfit Metal & Alloys is a prominent supplier and stockist of Monel K500 Stud Bolts, which is widely used in the chemical and marine industries. Alloy K500 Stud Bolts is readily weldable, has good resistance to non-oxidizing acids, and is also not susceptible to chloride stress corrosion cracking. Cold working for Nickel-Alloy K500 Stud Bolts may be done using soft die materials for better finishing, because it may be annealed at 926 Degree C (1700 Degree F). Monel UNS N05500 Stud Bolts needs to be turned and worked at slow speeds and low feed rates, because it is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. Typical applications of Monel WNR 2.4375 Stud Bolts include pumps and valves, marine fixtures and fasteners, propeller shafts, electronic components, chemical processing equipment, springs, fresh and salt water tanks, etc.
Monel Alloy K500 Stud Bolts has excellent mechanical properties at subzero temperatures, as strength and hardness of the alloy increase with only slight impairment of ductility or impact resistance. The high mechanical properties, ductility and resistance to atmospheric corrosion lend DIN 2.4375 Stud Bolts to feature as rivets in the construction of aluminum skinned aircraft and aluminum ladders. Monel N05500 Stud Bolts is also resistant to many forms of sulfuric and hydrochloric acids under reducing conditions and it also performs well in seawater.
ASME SF468 Monel K500 Threaded Rod, Alloy K500 Hex Studs, Nickel Alloy K500 Threaded Stud Bolts, Monel DIN 2.4375 Tie Bar Shoulder Bolt Supplier & Exporter in India.
Monel K500 Stud Bolts Specification
| Grade | Monel K500 (UNS N05500) |
|---|---|
| ASTM/ASME Specifications | ASTM B 166 / ASME SB 166 |
| Monel K500 Stud Bolt size | M02 to M33, Custom Sizes |
| Monel K500 Stud Bolts Length | 3 mm to K500 mm | Custom Sizes |
| Monel K500 Stud Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Stud Bolts | DIN 525, DIN 835, DIN 938, DIN 939, DIN 940, DIN 949-1, DIN 949-2, DIN 975, DIN 976, DIN 2509, BS 2693, BS 3692, BS 4439, IS 1862, IS 13218, ANSI/ASME B18.31.2, ANSI/ASME B16.5 |
| Form of Monel K500 Stud Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Monel K500 Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Stud Bolt | Stud Bolts, Fully Threaded Stud Bolts, Tap End Stud Bolts, Double End Stud Bolts, Stud Bolts with Reduced Shank, Reduced Shank, Flange Stud Bolts, Flange Bolting, Weld Studs |
| Monel K500 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Stud Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD K5000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Stud Bolts | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Packing of Stud Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Stud Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Stud Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, Monel plated, anodizing, plated zinc-Monel Zinc (blue, black, yellow, white), black oxide, |
Monel K500 Stud Bolt Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Chemical Composition of Monel K500 Stud Bolt
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Mechanical Properties of Monel K500 Stud Bolt
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Types of Monel K500 Stud Bolt
Monel K500 Fully Threaded Stud Bolts
Monel K500 Stud Bolts with Reduced Shank
Monel K500 Flange Stud Bolts
Monel K500 Tap End Stud Bolts
Monel K500 Double End Stud Bolt
Monel K500 Tie Bar
Monel K500 Wheel Lug Stud Bolt
Monel K500 Reduced Shank
Monel K500 Weld Studs
Monel K500 Stud Bolt Forms & Availability
| Products | Size | |
|---|---|---|
| Monel K500 Fully Threaded Stud Bolts | Monel K500 Tap End Stud Bolts | M02 to M33, Custom Sizes |
| Monel K500 Double End Stud Bolts | Monel K500 Stud Bolts with Reduced Shank | |
| Monel K500 Reduced Shank | Monel K500 Flange Stud Bolts | |
| Monel K500 Flange Bolting | Monel K500 Weld Studs | |
| Monel K500 Threaded Stud Bolts | Monel K500 Threaded Studs | |
| Monel K500 Continuous Thread Stud Bolt | Monel K500 Partial Threaded Stud Bolt | |
| Monel K500 Reduced Shank Stud Bolt | Monel K500 Allen Heavy Stud Bolts | |
ANSI And/Or ASME Standards Stud Bolt (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Continuous Thread Stud Bolts | ANSI/ASME B18.31.2 | Inch Series |
| Stud Bolts with Chamfered End for Flange Bolting | ANSI/ASME B16.5 | Inch Series |
| Welding Studs / Weld Studs | DIN 525 | Metric |
| Double End Stud Bolts / Double Ended Studs | DIN 835 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 1 x Diameter | DIN 938 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 1.25 x Diameter | DIN 939 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 2.5 x Diameter | DIN 940 | Metric |
| Double End Studs With Thread Engagement Length Equals to 2D | DIN 949-1 | Metric |
| Double End Studs With Thread Engagement Length Equals to 2.5D | DIN 949-2 | Metric |
| Plain End Stud Bolts / Threaded Rods | DIN 975 | Inch Series |
| Plain End Stud Bolts / Threaded Rods | DIN 976 | Metric |
| Double End Studs / Stud Bolts | DIN 2509 | Metric |
| Double End Stud Bolts With Reduced Shank | DIN 2510 L, DIN 2510 Z, DIN 2510 K, DIN 2510 ZU/KU, DIN 2510 GP, DIN 2510 GQ, DIN 2510 GR, DIN 2510 GS, DIN 2510 HP | Metric |
| Studs / Stud Bolts | BS 2693 | Inch Series |
| Stud Bolts | BS 3692 | Metric |
| Double End Stud Bolts With Thread Engagement Length Equals to 1.5 x Diameter | BS 4439 | Metric |
| Stud Bolts | IS 1862 | Metric |
| Clamping Studs | IS 13218 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Monel K500 Stud Bolt Size Chart
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
Monel K500 Double Ended Stud Bolts Weights
| Metric Studs Bolts Weights | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M20 | M22 | M24 | M30 | M36 | M39 |
| 60 | 5,6 | 8,1 | 12 | 15,6 | ||||||
| 70 | 6,1 | 8,9 | 13 | 16,9 | ||||||
| 80 | 6,6 | 9,6 | 14 | 18,2 | 32,5 | |||||
| 90 | 7,1 | 10,3 | 15 | 19,6 | 34,5 | 45,5 | ||||
| 100 | 7,6 | 11 | 16 | 21 | 36,7 | 47,2 | 54,2 | |||
| 110 | 8,1 | 11,7 | 17 | 22,2 | 38,7 | 48,3 | 58,2 | |||
| 150 | 10,1 | 14,9 | 20,8 | 27,5 | 46,9 | 58,5 | 69,2 | 121 | 192 | 237 |
| 160 | 10,6 | 15,6 | 21,8 | 29,1 | 49 | 61 | 72,2 | 126 | 199 | 245 |
| 170 | 16,4 | 22,8 | 30,4 | 51,1 | 63,5 | 75,2 | 130 | 206 | 253 | |
| K500 | 34,5 | 56,2 | 71 | 84 | 144 | 226 | 278 | |||
| 210 | 35,8 | 58,5 | 73,5 | 88,4 | 149 | 233 | 286 | |||
| 230 | 38,5 | 62,6 | 78,6 | 94,4 | 159 | 247 | 302 | |||
| 240 | 39,8 | 64,7 | 81,2 | 97,4 | 164 | 253 | 310 | |||
| 250 | 41,1 | 66,8 | 83,7 | 100,4 | 172 | 260 | 319 | |||
| 260 | 68,8 | 86,3 | 103,4 | 177 | 267 | 327 | ||||
| 270 | 70,9 | 88,8 | 106,4 | 182 | 274 | 335 | ||||
| 280 | 73 | 91,4 | 109,4 | 187 | 281 | 343 | ||||
| 290 | 75 | 93,9 | 112,4 | 192 | 291 | 360 | ||||
| 300 | 77,1 | 96,5 | 115,4 | 196 | 298 | 368 | ||||
| 320 | 101,6 | 121,3 | 206 | 312 | 380 | |||||
| 360 | 133,3 | 224 | 340 | 411 | ||||||
| 380 | 234 | 353 | 428 | |||||||
| K500 | 243 | 367 | 444 | |||||||
| 420 | 252 | 381 | 460 | |||||||
| 460 | 271 | 408 | 493 | |||||||
| 480 | 281 | 422 | 509 | |||||||
| 500 | 290 | 436 | 526 | |||||||
| Imperial Weight Chart | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M20 | M22 | M24 | M30 | M36 | M39 |
| 60 | 5,6 | 8,1 | 12 | 15,6 | ||||||
| 70 | 6,1 | 8,9 | 13 | 16,9 | ||||||
| 80 | 6,6 | 9,6 | 14 | 18,2 | 32,5 | |||||
| 90 | 7,1 | 10,3 | 15 | 19,6 | 34,5 | 45,5 | ||||
| 100 | 7,6 | 11 | 16 | 21 | 36,7 | 47,2 | 54,2 | |||
| 110 | 8,1 | 11,7 | 17 | 22,2 | 38,7 | 48,3 | 58,2 | |||
| 150 | 10,1 | 14,9 | 20,8 | 27,5 | 46,9 | 58,5 | 69,2 | 121 | 192 | 237 |
| 160 | 10,6 | 15,6 | 21,8 | 29,1 | 49 | 61 | 72,2 | 126 | 199 | 245 |
| 170 | 16,4 | 22,8 | 30,4 | 51,1 | 63,5 | 75,2 | 130 | 206 | 253 | |
| K500 | 34,5 | 56,2 | 71 | 84 | 144 | 226 | 278 | |||
| 210 | 35,8 | 58,5 | 73,5 | 88,4 | 149 | 233 | 286 | |||
| 230 | 38,5 | 62,6 | 78,6 | 94,4 | 159 | 247 | 302 | |||
| 240 | 39,8 | 64,7 | 81,2 | 97,4 | 164 | 253 | 310 | |||
| 250 | 41,1 | 66,8 | 83,7 | 100,4 | 172 | 260 | 319 | |||
| 260 | 68,8 | 86,3 | 103,4 | 177 | 267 | 327 | ||||
| 270 | 70,9 | 88,8 | 106,4 | 182 | 274 | 335 | ||||
| 280 | 73 | 91,4 | 109,4 | 187 | 281 | 343 | ||||
| 290 | 75 | 93,9 | 112,4 | 192 | 291 | 360 | ||||
| 300 | 77,1 | 96,5 | 115,4 | 196 | 298 | 368 | ||||
| 320 | 101,6 | 121,3 | 206 | 312 | 380 | |||||
| 360 | 133,3 | 224 | 340 | 411 | ||||||
| 380 | 234 | 353 | 428 | |||||||
| K500 | 243 | 367 | 444 | |||||||
| 420 | 252 | 381 | 460 | |||||||
| 460 | 271 | 408 | 493 | |||||||
| 480 | 281 | 422 | 509 | |||||||
| 500 | 290 | 436 | 526 | |||||||
Monel K500 Stud Bolt Torque Chart
| Flange Size |
B16.5 Class 150 RF/ Ring Gaskets | B16.5 Class 150 FF/ Full Face Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | |||||||
| 1st | 2nd | Final | Dwg/No. | Bolt Size | 1st | 2nd | Final | Dwg*/No. | Bolt Size | |
| 1/2″ | 10 | 20 | 30 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 3/4″ | 13 | 27 | 40 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1″ | 15 | 30 | 50 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1-1/4″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1-1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 2-1/2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 3″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 3-1/2″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
| 4″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
| 5″ | 60 | 120 | K500 | 8-bolt | 3/4″ | 60 | 120 | K500 | 8-bolt | 3/4″ |
| 6″ | 60 | 120 | K500 | 8-bolt | 3/4″ | 60 | 120 | K500 | 8-bolt | 3/4″ |
| 8″ | 60 | 120 | K500 | 8-bolt | 3/4″ | 60 | 120 | K500 | 8-bolt | 3/4″ |
| 10″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
| 12″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
| 14″ | 147 | 294 | 490 | 12-bolt | 1″ | 147 | 294 | 490 | 12-bolt | 1″ |
| 16″ | 147 | 294 | 490 | 16-bolt | 1″ | 147 | 294 | 490 | 16-bolt | 1″ |
| 18″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ |
| 20″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ |
| 24″ | 300 | 625 | 1,000 | 20-bolt | 1-1/4″ | 300 | 625 | 1,000 | 20-bolt | 1-1/4″ |
Monel K500 Stud Bolts Dimension
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M10 | 10 | 0.3937 | 17 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | K500 |
Other Types of Monel K500 Stud Bolts
| K500 Monel Threaded Rod | Alloy K500 Studs |
| Alloy K500 Tie Rod | K500 Monel Stud Bolts |
| ASTM F468 Monel K500 Double Ended Stud | Monel WNR. No. 2.4375 Threaded Studs |
| Monel WNR. No. 2.4375 Studs | ASTM F468 Monel K500 Threaded Studs |
| K500 Monel Alloy Hex Stud | Nickel Alloy K500 Stud Bolts |
| Nickel Alloy K500 Double Ended Stud | K500 Monel Alloy Hex Studs |
| Monel UNS N05500 Threaded Stud | Monel JIS NW 4400 Threaded rod |
| Monel JIS NW 4400 Threaded Stud | Monel UNS N05500 Class A Double Ended Stud |
| ASME SF468 Alloy K500 MS Stud Bolts | Alloy N04400Metric Thread Stud Bolt |
| Alloy N04400 Threaded Stud | ASME SF468 Alloy K500 Stud Half Thread Bolts |